Setting Up Catalyst Monitoring Configuration

Created by Lakshmi Vasanth, Modified on Thu, 9 Jan at 4:35 AM by Lakshmi Vasanth

You can set up the Catalyst configuration for monitoring to ensure accurate data analysis of the network devices.

1. Navigate to Settings > Configuration > AIOps.

The AIOps page is displayed.

2. Click Add New.

The Add System Configuration dialog is displayed.

Note: All fields with an asterisk (*) are mandatory.

3. Choose Exist from the Select Public IP options.

Note: Ceburu will automatically pull the IP and auto-populate the details in the Public IP fields as you have previously configured Public IP in Settings > Configuration > Asset Management.

4. Select the option Catalyst.

The fields to configure the IP Proxy Machine are displayed.

5. Select or enter the required values in the fields. Please refer to the following table for field names and their descriptions.

Field	Description
Select Proxy Machine	Configured RHEL system
Domain/ System Username	Active Directory account username
Domain/ System Password	Corresponding Active Directory account password
IP Range - Range of IP addresses within the configured router subnet for monitoring
Enter Subnets	Subnets to be monitored
Enter Place	Location information for the subnet
Select Profile - Profile for device monitoring
Profile	SNMP profile (v1/v2 or v3) You can create a new SNMP profile from Settings > Configurations > SNMP or use Add Profile.

4. Click Save.

Ceburu will automatically install or set up a proxy on your configured RHEL system. Once the setup is complete, the proxy will collect data from your routers and push it to the cloud.